University Webmaster

University Webmaster

Email:

Available Programmes:

B.Eng. Electrical and Electronics Engineering

Philosophy:

The Philosophy of Electrical and Electronic Engineering programme of Osun State University is to train students and produce graduates with high academic standards and adequate practical background in Electrical and Electronic Engineering through broad-based training and exposure to industrial as well as entrepreneurial practices to enable them to become self-employed as well as satisfy the immediate manpower needs of the industry and the community.

Objectives:

The specific objectives of the programme are:

  1. a) Provision of broad-based academic and practical training to achieve mastery in Electrical and Electronics Engineering concepts;
  1. b) To provide a wide range of quality learning opportunities for students in Electrical and Electronics Engineering without distinction of race, creed, sex, religious or political conviction such that will enhance their best intellectual, social and personal development;
  1. c) To provide academic, professional and vocational training of high quality in Electrical and Electronics Engineering, in such a way as to enrich and improve the state, national and international human resources capabilities and assist its graduates to contribute to the common good of society;
  1. d) Training individuals in the standard engineering practices as applicable to the modern techniques; formulating solutions to the various industrial, manufacturing, and service delivery problems prevalent in our society;
  1. e) To foster academic research in Electrical and Electronics Engineering, which contributes to human knowledge and the vitality of the institution;
  1. f) To evolve academic programmes in Electrical and Electronics Engineering to suit the changing social and economic needs of society through continuous review of curricula and development of new programmes to respond to societal and technological changes in Osun State in particular, Nigeria and the world in general.

 Admission Requirements:

General

For admission into first degree programmes of the University, a candidate shall be required to possess the following minimum qualification:

  1. Senior School Certificate Examination (SSCE) or its equivalents with credit passes in five (5) subjects including English Language and Mathematics, at not more than two sittings. The candidate must also earn an acceptable score in the Unified Tertiary Matriculation Examination (UTME) and Post Unified Tertiary Matriculation Examination (PUTME)
  2. In addition to requirement (1), candidates seeking admission by direct entry must have passes in Maths, Physics and Chemistry at GCE ‘A’ level or equivalent.

Departmental Admission Requirement

Requirements for admission into Electrical and Electronics Engineering programme are guided by the University policy on admission and in accordance with the NUC guidelines.

U.T.M.E. Requirements

To qualify for admission into the programme in the Department, a candidate must possess at least five (5) credit passes in SSCE or NECO (O’ Level), obtained at not more than two sittings, which must include the following subjects: English Language, Mathematics, Physics, Chemistry and any other Science subject.

Candidates with acceptable passes in the Pre-Degree Programme Examination of the Osun State University and that have an acceptable pass in the UTME may also be admitted into the 5-year degree programme of the Department.

Direct Entry Requirements

Candidates with passes at the Advanced Level (A-Level) in relevant subjects, which must include Mathematics, Physics and Chemistry and those with OND (Upper Credit) and HND (minimum of Lower Credit) from any higher institution recognized by the University Senate may be admitted into the 200-level, provided such candidate fulfill the UTME admission requirements of the Department. In addition, HND holder (with minimum of Upper Credit) may be admitted into 300 level.

Post UTME Screening

All candidates seeking admission into the University shall be required to pass the University Post UTME Screening test before being admitted.

Registration Procedure

(a)          Students shall normally complete registration at the beginning of the semester.

(b)          Any addition or deletion from the courses for which a student is formally registered must be made with the consent of the course coordinator.

(c)           A students may be allowed to withdraw from a course by the course administrator before a third of lectures have been given. Such a student who withdraws after this time or who fails to sit for examination without reasons acceptable to the appropriate Faculty/College Board shall be deemed to have failed the course. A grade point of 0 F shall be recorded for the student in the course.

(d)          Late registration in the course may be allowed with penalty of up to 4 weeks after the commencement of registration.

Duration of Degree Programmes

The minimum duration for the Bachelor of Engineering (B.Eng) programme is 10 semesters. Direct entry candidates with ND and equivalents shall have minimum duration of 8 semesters while those with HND shall have minimum duration of 6 semesters.

Graduation Requirements

To qualify for the award of a degree of the Osun State University, a student is required to have:

  • registered and passed all compulsory and required courses as well as the number of elective courses specified for the programme by the University.
  • completed and met the standards for all compulsory, required and optional courses.
  • obtained the prescribed minimum CGPA.

Brief History:

Dr Kehinde O ALAWODEDr. Kehinde O. Alawode

Ag. HOD

Email:  

The Department of Electrical and Electronics Engineering is one of the two pioneer departments in the Faculty of Engineering under the College of Science, Engineering and Technology of Osun State University. Academic activities commenced in very first session (2007/2008) of the establishment of the University. The Department runs a 5-year undergraduate programme leading to the award of the Bachelor of Engineering (B. Eng.) degree in Electrical and Electronics Engineering.

The academic programme of the Department operates academic curricula that is tailored along the stipulations contained in the Benchmark Minimum Academic Standards (BMAS) of the National Universities Commission (NUC) and the BMAS of the Council for the Regulation of Engineering in Nigeria (COREN). The curriculum exposes Students to basic knowledge, best practices and current advances in the field of Electrical and Electronics Engineering as well as entrepreneurial and industrial training with a view to enabling them to be arrow heads of the technological development of Nigeria while also being globally competitive. In their final year, Students can specialize in any of the following:

  1. Power Systems and Machines
  2. Telecommunications
  3. Instrumentation and Control.

The Department enjoys modern communication and information technology facilities available in the University and these are judiciously utilized for teaching and research. The first set of students graduated from the Department of Electrical and Electronic Engineering at the end of the 2011/2012 academic session.

100 LEVEL HARMATTAN SEMESTER

Course Code

Course Title

Pre-Req.

Total Units

Status

CHM101

General Chemistry I

-

3

C

CHM107

Experimental Chemistry I

-

1

C

CVE101

Engineer in Society

-

2

R

GNS101

Use of English I

-

2

R

GNS103

Use of Library

-

1

R

MTH101

General Mathematics I

-

3

C

MEE101

Engineering Drawing I

-

2

R

PHY101

General Physics I

-

3

C

PHY107

Experimental Physics I

-

1

C

 

Total Units

 

18

 

100 LEVEL RAIN SEMESTER

Course Code

Course Title

Pre-Req.

Total Units

Status

CHM102

General Chemistry II

-

3

C

CHM108

Experimental Chemistry II

-

1

C

GNS102

Use of English II

-

2

R

GNS104

Nigerian Peoples & Culture  

-

2

R

MTH102

General Mathematics II

-

3

C

MTH104

General Mathematics III

-

3

C

MEE102

Workshop Technology I

-

2

R

MEE104

Engineering Drawing II

 

2

R

PHY102

General Physics II

-

3

C

PHY108

Experimental Physics II

-

1

C

 

Total Units

 

22

 

200 LEVEL HARMATTAN SEMESTER

Course Code

Course Title

Pre-Req.

Total Units

Status

CSC 201

Structured Programming

-

3

C

EEE 201  

Applied Electricity I  

-

2

C

EEE 231

Engineering Mathematics I

MTH101,MTH102 MTH104

3

C

EEE 291    

Applied Electricity Laboratory I  

-

1

C

GNS 211

Basic French

-

2

R

GNS 203

Introduction to Entrepreneurial Skills

-

2

R

MEE 201

Engineering Materials

-

2

C

MEE 203 

Engineering Mechanics I (Statics)  

-

2

C

MEE 207   

Basic Thermodynamics

-

3

C

STA 221

Statistics for Physical Sciences and Engineering

-

3

C

 

Total Units

 

23

 

200 LEVEL RAIN SEMESTER

Course Code

Course Title

Pre-Req.

Total Units

Status

CVE 204  

Fundamentals of Building Construction

-

2

C

CVE 206

Strength of Materials

-

3

C

EEE 202

Applied Electricity II

-

2

C

EEE 232

Engineering Mathematics II

EEE231

3

C

EEE 292

Applied Electricity Lab II

-

1

C

GNS 212

Introduction to Information and Communication Technology

-

2

R

GNS 204

Logic and Philosophy

-

2

R

MEE 204 

Engineering Mechanics II   (Dynamics)

MEE203

2

C

MEE 206  

Basic Fluid Mechanics   

     -

2

C

MEE 208

Workshop Technology II 

MEE102

2

C

 

Total Units

 

21

 

CVE 200: SWEP I (Vacation Period)                                                                            8weeks

300 LEVEL HARMATTAN SEMESTER

Course Code

Course Title

Pre-Req.

Total Units

Status

CVE 305

Engineering Geology

-

3

C

CVE 307

Soil Mechanics I

-

3

C

CVE 309

Surveying and Photogrammetry I

-

3

C

CVE 313

Basic Hydrology

-

3

C

CVE 315

Civil Engineering Drawing

-

2

C

CVE 317

Elements of Architecture

-

3

C

EEE 331

Engineering Mathematics III

EEE232

3

C

 

Total Units

 

20

 

 

300 LEVEL RAIN SEMESTER

Course Code

Course Title

Pre-Req.

Total Units

Status

CVE 304

Structural Mechanics

-

3

C

CVE 306

Civil Engineering Materials

-

3

C

CVE 308

Design of Structures I

-

3

C

MEE 308

Fluid Mechanics II

MEE206

3

C

EEE 332

Engineering Mathematics IV

EEE331

3

C

CVE 314

Computer Methods in Civil Engineering

-

2

C

CVE 316

Hydraulics

-

3

C

 

Total Units

 

20

 

CVE 300: SWEP II (Vacation Period)                                                                           8weeks

 

400 LEVEL HARMATTAN SEMESTER

Course Code

Course Title

Pre-Req.

Total Units

Status

CVE 401  

Technical Report Writing

    -

2

C

CVE 403

Quantity Surveying and Estimating

    -

2

C

CVE 405

Soil Mechanics II

    -

2

C

CVE 407

Civil Engineering Practice

    -

2

C

CVE 409

Design of Structures II

    -

3

C

CVE 411

Structural Analysis I

    -

3

C

CVE 413

Highway Engineering I

    -

2

C

CVE 415

Water Resources & Environmental Engineering I

    -

2

C

CVE 417

Surveying and Photogrammetry II

    -

3

C

 

Total Units

 

21

 

400 LEVEL RAIN SEMESTER

Course Code

Course Title

Pre-Req.

Total Units

Status

CVE200

SWEP I

 

2

C

CVE300

SWEP II

 

2

C

CVE400         

Student (Supervised) Industrial Work Experienced Scheme (SIWES)

CVE300

6

C

 

Total Units

 

10

 

500 LEVEL HARMATTAN SEMESTER

Course Code

Course Title

Pre-Req.

Total Units

Status

CVE 501

Students Project

 

3

C

CVE 503

Structural Analysis II

CVE 411

2

C

CVE 505

Design of Structures III

CVE 409

2

C

CVE 509

Geotechnical Engineering

CVE 405

4

C

CVE 511

Industrial Economics

 

2

C

CVE 513

Industrial Law and Management

 

2

C

 

 ELECTIVES: One of the following (3 Units)

     

CVE519

Environmental Pollution

 

3

E

CVE521

Advanced Structural Analysis

 

3

E

CVE525

Drainage & Irrigation Engineering

 

3

E

CVE 527

Construction Engineering

 

3

E

 

Total Units

 

18

 

500 LEVEL RAIN SEMESTER

Course Code

Course Title

Pre-Req.

Total Units

Status

CVE 502

Students Project

 

3

C

CVE 504

Highway Engineering II

CVE 405

2

C

CVE 510

Hydraulic Structures

CVE 415

3

C

CVE 520

Water Resources and Environmental Engineering II

 

3

C

CVE 522

Transportation Engineering

 

3

C

 

ELECTIVES : two of the following (3 Units)

     

CVE512

Traffic and Highway Engineering

 

3

E

CVE 516

Advanced Strength of Materials

CVE 202

3

E

CVE 518

Unit Processes Water and Waste Water resources engineering

 

3

E

CVE 524

Geotechnical Engineering II

CVE 507

3

E

 

Total Units

 

20

 

Available Programmes:

B.Eng. Civil Engineering

Philosophy:

The Philosophy of Civil Engineering programme of Osun State University is to train and produce qualified engineers with high academic standards and adequate practical background in Civil Engineering through broad-based training and exposure to industrial as well as entrepreneurial practices to enable them satisfy the immediate manpower needs of the industry and the community.

Objectives:

The specific objectives of the programme are to:

  • provide a wide range of academic and practical training to achieve mastery in Civil Engineering concepts;
  • provide a wide range of quality learning opportunities for students in civil Engineering without distinction of race, colour, religion or political belief;
  • offer academic, professional and vocational training of high quality in Civil Engineering, in such a way as to enrich and improve the state, national and international human resources capabilities and assist its graduates to contribute to the common good of society;
  • train individuals in the standard engineering practices as applicable to the modern techniques, formulating solutions to the various industrial, manufacturing, and service delivery problems prevalent in our society;
  • provide students with opportunity to develop, after a basic understanding of all areas of Civil Engineering practice, his special area of interest which include structural engineering, geotechnical engineering, transportation planning and highway engineering, construction management, water resources, project management and environmental engineering;
  • foster academic research in Civil Engineering that contributes to human knowledge and the vitality of the institution; and
  • evolve academic programme in Civil Engineering to suit the changing social and economic needs of society through continuous review of curricula and development of new programmes to respond to societal and technological changes in Osun State in particular, Nigeria and the world in general.

Admission Requirements:

General

For admission into any of the first degree programmes of the Unviversity, a candidate shall be required to possess the following minimum qualifications:

  • Senior Secondary School Certificate (SSCE) or its equivalents with credit level passes in five (5) subjects including English Language, Mathematics, Physics, Chemistry and any other Science subject at not more than two sittings. The candidate must also earn an acceptable score in the Unified Tertiary Matriculation Examination (UTME) and Post Unified Tertiary Matriculation Examination (PUTME).
  • For Direct Entry, candidates must have passes in Mathematics, Physics and Chemistry at GCE ‘A’ level or equivalent. Holders of OND and HND at minimum of upper credit level are eligible for consideration for admission into 200 and 300 levels respectively.

Departmental Admission Requirement

Requirements for admission into Civil Engineering programme are guided by the University policy on admission and in accordance with the NUC guidelines.

UTME Requirements

To qualify for admission into the programme in the department, a candidate must possess at least five (5) credit level passes in SSCE or NECO (O’ Level), obtained at not more than two sittings, which must include English Language, Mathematics, Physics, Chemistry and any other Science subject. It is also desirable for candidates to have Further Mathematics and Technical Drawing at credit levels. Such candidates shall have added advantage.

Candidate with acceptable passes in the Pre-Degree Programme Examination of the Osun State University and that has acceptable pass in the UTME may also be admitted into the 5-year degree programme of the Department.

 Direct Entry Requirements

Candidates with passes at the Advanced Level (A-Level) in relevant subjects, which must include Mathematics, Physics and Chemistry and those with OND (Upper Credit) and HND (minimum of Lower Credit) from any higher institution recognized by the University Senate may be admitted into the 200-Level, provided such candidate fulfill the UTME admission requirements of the Department. In addition, holder of HND with minimum of Upper Credit may be admitted into 300-Level.

 Post UTME Screening

All candidates seeking admission into the University shall be required to pass the University Post UTME Screening test before being admitted.

 Registration Procedure

  1. Students shall normally complete registration at the beginning of the semester.
  2. Any addition or deletion from the courses for which a student is formally registered must be made with the consent of the course coordinator.
  3. A student may be allowed to withdraw from a course by the course administrator before one-third of lectures have been given. Such a student who withdraws after this time or who fails to sit for the examination without reasons acceptable to the appropriate Faculty/College Board shall be deemed to have failed the course. A Grade Point of 0F shall be recorded for such student in the course.
  4. Late registration in the course may be allowed with penalty of up to 4 weeks after the commencement of registration.

 Duration of Degree Programmes

The minimum duration for the Bachelor of Engineering (B.Eng.) programme is 10 semesters. Direct entry candidates with ND and the equivalents shall have minimum duration of 8 semesters while those with HND shall have minimum duration of 6 semesters.

 Graduation Requirements

To qualify for a degree of the Osun State University, a student is required to have:

  1. Completed and passed the prescribed number of units including all compulsory courses specified by the University.
  2. Completed and met the standards for all required and optional courses.
  3. Obtained the prescribed minimum CGPA.
Page 8 of 184

Get In Touch

For enquiries on admissions, please contact

  • Address: Room 228, Admission Office, 
    Administrative building, 
    Osun State University,
    Main Campus, Osogbo, Osun State.
  • Tel: 08107976419 (9am - 4pm WAT, Mon - Fri)
  • Email:
Top
We use cookies to improve our website. By continuing to use this website, you are giving consent to cookies being used. More details…