USE OF STUDENT’S IDENTIFICATION CARD
This is to notify all students that wearing of University student identification card is now mandatory. Students are to put on their I.D. cards at all times within the university.
Students are hereby enjoined in their own interest to abide strictly by this directive as defaulters would be sanctioned appropriately.
Thank you.
G.A.A Shittu
Registrar
General
For admission into any of the first degree programmes of the University, a candidate shall be required to possess the following minimum qualifications:
1. Senior Secondary School Certificate (SSCE) or its equivalents with credit level passes in five (5) subjects at not more than two sittings. The candidate must also earn an acceptable score in the Unified Tertiary Matriculation Examination (UTME).
2. Candidates seeking admission by direct entry into the 200 level, must have at least five (5) O/L credits, two of which must be at Advanced Level or approved equivalents.
Departmental Admission Requirement
Requirements for admission into Civil Engineering programme are guided by the University policy on admission and in accordance with the NUC guidelines.
UTME Requirements
To qualify for admission into the programme in the Department, a candidate must possess at least five (5) credit passes in SSCE or NECO (O’ Level), obtained at not more than two sittings, which must include the following subjects: English Language, Mathematics, Physics, Chemistry and any other Science subject.
Candidates with acceptable passes in the Pre-Degree Programme Examination of the Osun State University and that have an acceptable pass in the UTME may also be admitted into the 5-year degree programme of the Department.
Direct Entry Requirements
Candidates with passes at the Advanced Level (A-Level) in relevant subjects, which must include Mathematics, Physics and Chemistry and those with OND, NCE (Upper Credit) and HND (minimum of lower Credit) from any higher institution recognized by the University Senate may be admitted into the 200-level, provided such candidate fulfill the UTME admission requirements of the Department.
Candidates with acceptable passes in the Advanced Diploma Programme of Osun State University may also be admitted into the 200-level, provided such candidate fulfill the UTME admission requirements of the Department.
Post UTME Screening
All candidates seeking admission into the University shall be required to pass the University Post UTME Screening test before being admitted.
Registration Procedure
(a) Students shall normally complete registration at the beginning of the semester.
(b) Any addition or deletion from the courses for which a student is formally registered must be made with the consent of the course coordinator.
(c) A student may be allowed to withdraw from a course by the course administrator before a third of lectures have been given. Such a student who withdraws after this time or who fails to sit for examination without reasons acceptable to the appropriate Faculty/College Board shall be deemed to have failed the course. A Grade point of 0F shall be recorded for the student in the course.
(d) Late registration in the course may be allowed with penalty of up to 4 weeks after the commencement of registration.
Duration of Degree Programmes
The minimum duration for the Bachelor of Engineering (B.Eng) programme is 10 semesters. Direct entry candidates with ND/NCE and equivalents shall have minimum duration of 8 semesters while those with HND shall have minimum duration of 6 semesters.
Graduation Requirements
To qualify for the award of a degree of the Osun State University, a student is required to have:
(i) completed and passed the prescribed number of units including all compulsory courses specified by the University.
(ii) completed and met the standards for all required and optional courses.
(iii) obtained the prescribed minimum CGPA.
Program Educational Objectives (PEOs)
The main PEOs for Civil Engineering are that within three to five years of graduation, Civil Engineering graduates would have:
1. Become competent and engaged engineering professionals, applying their technical and managerial skills in the planning, design, construction, operation or maintenance of the built environment and global infrastructure,
2. Been utilizing their skills to analyze and design systems, specify project methods and materials, perform cost estimates and analyses, and manage technical activities in support of civil engineering projects.
3. Initiated an active program of life-long learning, including studies leading to professional licensure or an advanced degree in engineering, that provides for continued development of their technical abilities and management skills, and attainment of professional expertise.
4. Developed their communication skills in oral, written, visual and graphic modes when working as team members or leaders, so they can actively participate in their communities and their profession.
5. Established an understanding of professionalism, ethics, quality performance, public policy, safety, and sustainability that allows them to be professional leaders and contributors to society when solving engineering problems and producing civil engineering solutions.
6. Achieved excellence in engineering decision-making and design,
7. Attained leadership careers in engineering practice,
8. Completed graduate professional engineering education, pursued advanced study and research in engineering
9. Engaged in diverse, alternative career choices.
10. Demonstrated in their professional practice strong technical abilities and advance in careers in Civil Engineering and related disciplines
11. Assumed leadership positions, and contribute to understanding Civil Engineering problems and the design, construction, and operation of solutions of societal problems involving Civil and related engineering systems
12. Satisfied the expectations of employers of civil engineers.
Programme Outcomes
The curriculum for the Civil Engineering is designed to ensure that students at the time of graduation, would be able to:
1. Apply knowledge of mathematics through differential equations, calculus-based physics, chemistry, and at least one additional area of science.
2. Understand engineering fundamentals and their application to the solution of problems.
3. Apply knowledge of at least four technical areas appropriate to civil engineering, including but not limited to structural, geotechnical, transportation, environmental and water resources engineering;
4. Conduct civil engineering experiments and analyze and interpret the resulting data;
5. Design a system, component, or process in more than one civil engineering context;
6. Explain basic concepts in management, business, public policy, and leadership; and
7. Use technical drawing as a means of communicating details of structures, engineering components and systems
8. Identify and use different types of engineering machines and equipment
9. Gain industrial experience and skills as they relate to civil engineering profession.
10. Understand the philosophy, history and regulatory structures and details of engineering disciplines and practice in Nigeria.
11. Identify and understand how to test and manipulate different civil engineering materials in the creation of formidable structures with economic benefits.
12. Understand the essence of survey in engineering constructions and systems operations as well apply the survey equipment
13. Acquire interdisciplinary skills in other engineering fields like electrical, mechanical and metallurgical engineering.
14. Understand the tests and standards for water, soil and air as well as the equipment/tools for measuring them.
15. Explain hydrologic cycle, its effects on global economy, peace and conflicts and be able to calculate as well as interpret data of related parameters.
16. Understand and test as well as interpret soil parameters and importance to stability of structure and other engineering systems.
17. Understand building regulations, codes of practice and computer techniques in civil engineering designs.
18. Apply computational tools and programming in conducting civil engineering processes and designs of structures
19. Apply several civil engineering techniques in the design and construction of highways.
20. Create sound designs of structures and systems, subject to uncertainty and to multiple societal and engineering constraints.
21. Design and conduct experiments and analyze and interpret data.
22. Demonstrate skills in project management and an aptitude for management of multiple tasks.
23. Communicate effectively, both written and oral.
24. Demonstrate capacity for leadership, inclusiveness, and teamwork, Professionalism, including ethics.
25. Show desire to provide service to society, and an understanding of the contemporary dynamism of the Civil Engineering profession and of the need for continued scholarship.
26. Design systems, components and/or processes to meet the constituencies’ needs within realistic constraints.
27. Function in interdisciplinary researches and studies with multidisciplinary teams.
28. Identify, formulate and solve spatial, temporal and complex engineering problems.
29. Understand and respect professional and ethical rules in engineering and related fields.
30. Use techniques, skills and modern engineering tools, equipment and procedures to test strengths and properties of civil engineering materials, structures and systems
College of Science, Engineering and Technology
Faculty of Basic and Applied Sciences
Faculty of Engineering and Environmental Sciences
|
Date/Day |
9.00-12.00 |
12.00-3.00 |
3.00-6.00 |
||
|
OSUN STATE UNIVERSITY - 2018/ 2019 RAIN SEMESTER EXAM TIME TABLE FOR ENGINEERING DEPARTMENTS IN THE FACUY OF ENGINEERING AND ENVIRONMENTAL SCIENCES |
|||||
|
Tues. 20th Aug. |
|||||
|
Wed. 21st Aug. |
|||||
|
Thurs. 22nd Aug. |
|||||
|
Fri. 23rd Aug. |
|||||
|
Mon. 26th Aug., 2019 |
MTH 102/106 |
CVE 204 MEE 302 EEE 320 |
CVE 512 EEE 508 |
||
|
Tues. 27th Aug. |
MEE 204 |
CVE 314 MEE 508 |
EEE 510 |
||
|
Wed. 28th Aug. |
MTH 104 |
CVE 304 MEE 102 EEE 308 |
CVE 504 MEE 306 EEE 202 |
||
|
Thur. 29th Aug. |
MEE 504 CHM 102 |
CVE 206/202 |
|||
|
Fri. 30st Aug. |
CVE 506 MEE 314 EEE 316/EEE 306 |
MEE 208 |
|||
|
Sat. 31st Aug. |
CVE 306 EEE 314/304 |
||||
|
Mon. 2nd Sept., 2019 |
PHY 102 |
CVE 308 MEE 212/210 EEE 210 |
CVE 518 MEE 506 EEE 504 |
||
|
Tues. 3rd Sept. |
MEE 206 BIO 102 |
MEE 308/318 EEE 310 |
CSC 202 |
||
|
Wed. 4th Sept. |
MEE 104 |
CVE 302 MEE 304 EEE 512 |
CVE 514 MTH 202 |
||
|
Thur. 5th Sept. |
MEE 310 |
MEE 512/514/516 EEE 332 |
EEE 506/EEE 318 |
||
|
Fri. 6th Sept. |
CVE 508 MEE 312 |
CVE 332 MEE 502 MTH 302 MTH 206 |
|||
|
Sat. 7th Sept. |
EEE 232 EEE 514/522/536 |
CVE 510 |
COURSE DESCRIPTION (B.Eng. Civil Engineering) / OUTLINE
MEE 101: ENGINEERING DRAWING I (2 UNITS)
Engineering drawing as a means of communicating technical details for structures, components, engines etc. Materials and instrument in use for engineering drawing; Different types of lines & their uses; lettering, borderlines, details-box and dimensioning on drawings, paper sizes, drawing layout; First and third angle projections briefly introduced; Construction of points, lines angles, triangles and polygons; Orthographic projections; Conic sections; ellipse, parabola and hyperbola; Loci including involutes, cycloid, epi and hypocycloids etc.
MEE 102: WORKSHOP TECHNOLOGY I (2 UNITS)
Introduction to workshop practice, types of machine: Lathe, milling machine, shaper, drill, folding machine, shear, press, etc; their uses and tools. Safety in workshop; Organization of the workshop; Introduction to methods and tools for producing thread, holes, slots, tapers, etc. Introduction to wood workshop tools properties of wood and their influence on the detailed design of wooden structures and components, e.g wood fasteners, and preservation measures.
MEE 104: ENGINEERING DRAWING II (2 UNITS)
Representation of mechanical fastener in drawing: bolts, nut, studs, cap screws, rivets, etc. Internally threaded holes. Sectioning practices; necessity for sectioning, cutting planes and cutting plane lines; full and half sections; hatching; rules relating to sectioning; examples of sectioning in machine drawing. More on orthographic projections for standard machine parts. Isometric projections Points, lines and object in space: true shapes and dimensions. Auxilliary views, elementary intersection curves and development. Assembly drawings Cam profiles Symbols and abbreviations used in Mechanical, Civil and Electronic/Electrical Engineering.
CVE 200: STUDENTS WORK EXPERIENCE PROGRAMME I (2 UNITS)
A practical work programme, during the long vacation, arranged within the campus and its immediate environment to enable the students gain some basic skills in the profession of engineering in general and student’s chosen field of engineering in particular.
CVE 101: ENGINEER IN SOCIETY (2 UNIT)
Philosophy of science. History of Engineering and Technology in Nigeria. Divisioning of Engineering. Introduction to Engineering Associations and Regulatory Bodies. Interrelationship among Engineering Associations and Regulatory Bodies. Core Practice Areas of different Engineering Disciplines. Safety in Engineering. Introduction to Risk Analysis. The role of engineers in Nation Building.
CVE 204: FUNDAMENTALS OF BUILDING CONSTRUCTION (2 UNITS)
Essence of surveying in building, Foundations, Basement and external works, introduction to defects in construction works, building construction supervision, mechanical movement, devices and appliances, elements of architecture in building, construction economics, construction management, estimating in building construction, mechanical and electrical systems in building, alternative energy systems in building, fracture and failure of natural building stones.
CVE 206: STRENGTH OF MATERIALS I (3 UNITS)
Force equilibrium free body diagrams. Elasticity – concept of stress strain,
Tensile test, young’s modules and other strength factors. Axially loaded bars. Temperature stresses and simple indeterminate problems. Stresses in cylinders and rings. Bending moment, shear force and axial force. Diagrams for simple cases. Simple trusses and deflection of beams torsion.
EEE 201: APPLIED ELECTRICITY I (2 UNITS)
Fundamental theory of electric circuit. Circuit elements. Network theorems supper position, Theveinin, Norton). Nodal and loop analysis of circuits (Kirchoff’s laws) single time-constant circuits. Steady state response of circuit elements and network. Complex impedance and admittance. AC circuit impedance, admittance, susceptance phasor diagrams. Introduction to electronics, vacuum diode, triode and pentode, small signal equivalent circuits. Elementary discussion of semiconductors P. N junction diode transistors.
EEE 202: APPLIED ELECTRICITY II (2 UNITS)
Basic machines: DC synchronous alternators, transformers and equivalent circuits. Three phase balanced circuits. PN junction diode. Thyristor. FETs. Communication Fundamentals, introduction of TV, Radio and Telephone systems.
EEE 231: ENGINEERING MATHEMATICS I (3 UNITS)
Limits, Continuity, Differentiation, Introduction to linear first order differential equations, Partial and total Derivatives. Composite functions, Matrices and determinants, Vector algebra, Vector calculus, Directional derivatives.
EEE 232: ENGINEERING MATHEMATICS II (3 UNITS)
Second order differential equations, Line integral, Multiple integral and their applications, Differential of integral, Analytical functions of complex variables, Transformation and mapping, special functions.
EEE 291: APPLIED ELECTRICITY LABORATORY I (1 UNIT)
Laboratory experiments to demonstrate the application of the theory covered in the courses.
EEE 292: APPLIED ELECTRICITY LABORATORY II (1 UNIT)
Laboratory experiments to demonstrate the application of the theory covered in the courses.
MEE 201: ENGINEERING MATERIALS (2 UNITS)
Physical properties of materials; atomic and molecular structure, bonding forces, structure of materials, wood, cement, plastics, metallic states. Crystals and defects crystal, isotrophy and anisotrophy; essential and desirable properties of engineering materials; physical mechanical, thermal, chemical, technology and electrical properties. Common engineering materials for structures, machine parts/equipment, electrical items, instruments. Factors to be considered in the selection and choice of engineering materials.
MEE 203: ENGINEERING MECHANICS I (STATICS) (2 Units)
Fundamentals of mechanics; Forces in space, equivalent system, equilibrium of rigid bodies, distributed forces, center of gravity, internal actions, moment of inertia, virtual work, analysis of simple structures and machine parts.
MEE 204: ENGINEERING MECHANICS II (DYNAMICS) (2 Units)
Kinematics of a particle, system of particle and rigid bodies. Kinetics of particle, rotating coordinate system, energy and momentum methods. Analysis of elementary dynamics systems – dynamic system elements; mechanical, electrical, fluid and thermal, Modeling of physical systems, Applications. Lagrange’s and Hamilton’s equation.
MEE 206: BASIC FLUID MECHANICS (2 Units)
Nature and types of fluids. Physical properties of fluids. Fluids statics. Stability of submerged and floating bodies. Fluids flow concepts, conservation of mass, momentum energy. Simple application of conservation laws. Flow measurements.
Laboratory component: Experiments on Physical properties of fluids. Fluids statics. Stability of submerged and floating bodies. Fluids flow , conservation of mass, momentum energy. Simple application of conservation laws. Flow measurements.
MEE 207: BASIC THERMODYNAMICS (3 Units)
Basic concepts; units in use; open and close system; thermodynamics as the study of inter-relationships between work, heat and the properties of system, thermodynamics properties of a system; pressure, specific volume, temperature, internal energy. The first law of thermodynamics and its corollaries. Flow and non-flow processes, steady state equation and its application. The second law of thermodynamics and its corollaries. Reversibility and Irreversibility. The Thermodynamic temperature scale. Entropy and its characteristics. Pure substances. State changes in a system consisting a pure fluid substance.
MEE 208: WORKSHOP TECHNOLOGY II (2 Units)
Fabrication and machining of components from available drawings. Welding and fabrication; fundamentals of welding, welding processes, welding joint preparation, weld inspection, etc. Introduction to automobiles; main components of automobiles. Fundamentals of Engine operation and construction; basic concepts and definitions, engine cycles; principles of operation of valve mechanism, cooling, lubrication, fuel and starting systems,
STA 221: STATISTICS FOR PHYSICAL SCIENCES AND ENGINEERING (3 UNITS)
Probability- elements of probability, density and distribution functions, moments, standard distribution, etc.statistics- Regression and correlation- Large sampling theory. Test hypothesis and quality control.
CVE 300: STUDENTS WORK EXPERIENCE PROGRAMME II (2 UNITS)
A more advanced industrial Programme; students this time are attached, during long vacation, to appropriate Computer /Electrical / Electronics / Agricultural / Civil / Mechanical Engineering facilities and industries to further enhance practical approach to engineering through on-the job training.
CVE 304: STRUCTURAL MECHANICS (3 UNITS)
Analysis of determinate structures, Beams, Trusses; Structure Theorems. Graphical methods: Application to simple determinate trusses. Williot Mohr diagram. Deflection of statistically determinate structures. Unit load, moment area methods. Strain Energy Methods. Introduction to statistically indeterminate structures.
CVE 305: ENGINEERING GEOLOGY (3 UNITS)
The relevance of geology to Civil Engineering. The role of Civil Engineer in the systematic exploration of a site. Introduction to geology of Nigeria. The common rock formation minerals silicate and non-silicate minerals. Rock types – Igneous, metamorphic and sedimentary Geological structures and mapping. Stratigraphy and the geological time scale. The theory of plate tectonics. Geology exploration of an engineering site. Preliminary investigation. Applied geographical surveys, Drillings, Bony, Trenching and pitting. Classification of rocks for engineering purposes. The engineering properties of rocks, Blasting and rock excavation. The principal geological factors affecting the following engineering projects. The stability of slope and cutting, the stability of new excavation. Types of failures in soil slopes and natural rocks slopes. Stabilization of slopes. Impounded surface water, the geology of reservoir, dam sites and tunnels.
Practical: Rocks and mineral identification, microscopic works to identify the structure of minerals. Geological field work and visit to any geolocial museum.
CVE 306: CIVIL ENGINEERING MATERIALS (3 UNITS)
Concrete technology: constituent materials of concrete (types of cement, aggregates, properties) concrete mix design, quality control, properties and their determination. Steel technology production, fabrication and properties. Corrosion and its prevention. Tests on steel, quality control and uses. Timber technology: Types of timber, characteristics, defects stress grading, preservation and fire protection. Uses of timber. Bituminous materials, Polymers, Bricks and Blocks etc. Applications to buildings, Roads and Bridges.
CVE 307: SOIL MECHANICS I (3 UNITS)
Formation of soils. Soil in water relationship – void ratio, porosity, specific gravity and other factors. Soil classification: Atterberg limits, particle size distribution. Flow in soils - seepage and permeability.
Laboratory tests on each of the topics considered above.
CVE 308: DESIGN OF STRUCTURES I (3 UNITS)
Fundamentals of design, process, materials selection, building regulations and codes of practice. Design philosophy with regards to elastic, load factors and limit state methods. Design and of structural elements in reinforced concrete. Further work in Computer Aided Design.
CVE 309 SURVEYING AND PHOTOGRAMMETRY I (3 UNITS)
Introduction to the Principle and Practice of Surveying. Engineering surveys equipment such as chains, Tapes, EDM, Compass, Levels, Theodolite, Ranging Rod, Abney level, optical square etc. Chain survey: Principle and Method, obstacles and sources of errors. Detailing by offset method. Compass traverse orientation in surveying method of compass traverse. Adjustment and sources of errors. Levelling by different methods. Geodetic levelling: errors and their adjustments. Tachometry Methods: Substance heighting. Contouring, uses of Maps and Plans. Introduction to photogrammetry.
Practical: Surveying of a small area with chain and compass. Detailing of the area. Profile leveling, cross-section, calculations of earthwork. Setting out of building roads etc. using compass and chain.
CVE 313: BASIC HYDROLOGY (3 UNITS)
Discriptive hydrology, hydrologic cycle and components, precipitation, evaporation and transpiration, infiltration, runoff etc. Quantitative hydrology-hydrograph, volume runoff, storage ronting, Ground-water-Occurance, hydraulic well-yield.
Measurement of rainfall, methods of determining average rainfall e.g. simple arithmetic average, isohyetal. Thiessiens, polygons, Triangulation, weighted mean. Etc. Air temperatures, methods of determining average temperature, thermal gradient with respect to attitude, maximum and minimum temperatures. Use of statistics in hydrology. Frequency, probability and average return period. Methods of determining discharge of a given return period with different probabilities of non-evidence. Flood forecast and monitoring. Drought studies and flow analysis
CVE 314: COMPUTER METHODS IN CIVIL ENGINEERING (2 UNITS)
How computer is organized in terms of its architecture such as Random Access Memory (RAM), Read Only memory (ROM), Secondary Store and peripherals. Introduction to Object Oriented Programming (OOP) using Java as the programming language to highlight its control statements, class definition, object instances, inheritance, generic programming concept, files and I/O classes, concurrent programming concept and database programming. Java swing and AWT. Application to pipe network analysis (Hardy Cross method), Finite Element Method, Linear Programming and Simplex Method of optimization.
CVE 315: CIVIL ENGINEERING DRAWING (2 UNITS)
Symbols and conventions. Dimensions, notes, titles, working or construction drawing and relationship tp specifications. Plans, Floors, Foundations, Framing and Roof plans. Sections and Details, wall sections, building section and sectional elevations. Drawing and detailing of civil engineering structures e.g. bridges, dams, steel structures.
CVE 316: HYDRAULICS (2 UNITS)
Fluid: Statics, continuity, energy, momentum equations and Bernouli’s theorem. Dynamics of fluid flow, conservation of mass and momentum equations. Different devices for flow measurements and manning’s formulae. Reynolds number and turbulent flow. Losses in pipes and pipe network analysis. Steady and Unsteady flow in pipes with special emphasis on water hammer and the use of surge tanks. Similitude, dimensional analysis and hydraulic modeling techniques. Pipe network analysis, Design of reticulation systems. Laboratory experiments on coefficients of discharge and mathematical exponents a rectangular and v-notch weir, pressure drop in pipelines, flow measurements in venturi, orifice, energy drop due to hydraulic jump in an open channel.
CVE 317: ELEMENTS OF ARCHITECTURE (3 UNITS)
Introduction: Dimensional awareness, Graphic communication, relation to environments. Free hand drawing. Form in terms of light and shadow. Orthographic: diametric, perspective, projections. Applications: common curves, Elementary Designs. Computer Aided Design and Drawing (CADD)
EEE 331: ENGINEERING MATHEMATICS III (3 UNITS)
Numerical analysis and its applications to engineering problems, Operational methods, Transforms, Series and special functions in engineering.
EEE 332: ENGINEERING MATHEMATICS IV (3 UNITS)
Mathematical modeling of physical systems, Numerical techniques, Boundary value problems, Fourier integral, Fourier Series, Orthogonal functions and Sturm- Liouville systems, Partial differential equations including theory, classification and solution by various methods.
CVE 400: STUDENTS INDUSTRIAL WORK EXPERIENCE SCHEME (6 UNITS)
A comprehensive internship programme in which students spend a full semester in approved engineering establishments (private and public) and industries. The exposure also provide opportunity for students to sharpen their technical writing skill through field reports, keeping log – books and prepared technical documents under close supervision of industry-based professionals and lecturers.
CVE 401: TECHNICAL REPORT WRITING (2 UNITS)
Project proposal: Aims and Objectives, scope and methodology. Research work. Review of previous works and justifications for the project. Main investigations. Theoretical consideration, experimental works, field works and data collection, and designs analysis of data/results. Collation of findings, assessment of accuracy, further investigations, results consideration and objective. Oral communication: Public speaking skills with effective use of visual aids. Principles of effective communication in inter
Documentation. Format of write-up, major headings and sub-headings, citing of references, Tables, figures listing of references, Appendices and phraseology.
CVE 403: QUANTITY SURVEYING AND ESTIMATING (2 UNITS)
Scope of Civil Engineering works and standard methods of measurements. Duties of the Quality Surveyor. Setting down dimensions, cut and shuffle. General principles of rules of taking-off. Taking-off quantities from drawing substructures, walling, floors, roofs, finishing and external works. Planning and scheduling. Abstracting and billing. Preparation of Bill of Quantities specification writing, examples on complete building and civil engineering works.
CVE 405: SOIL MECHANICS II (2 UNITS)
Mineralogy of soils. Soil Structures. Compaction: General principles, reduced standard, standard modifies proctor and West African standard. Maximum dry density, optimum moisture content, zero air-voids curve, field control tests, percent compaction and soil stabilization. Site investigation. Laboratory and Coursework.
CVE 407: CIVIL ENGINEERING PRACTICE (2 UNITS)
Civil Engineering works standards and measurements. Contracts and sub-contract work. Construction and supervision. Job planning and control-programme, charts, bar charts, critical path methods etc. construction, bridges, highway, industrial buildings, sewage works.
CVE 409: DESIGN OF STRUCTURES II (3 UNITS)
Limit state philosophy and design in steel; basic concepts of elastic and plastic design. Design and detailing of structural steel elements, tension member, strut, beams, girders and columns. Design of connections and joints in structural steel. Beam and Columns in flexure. Design of foundation. Carry out studio work on practical designs. Design of structural elements in timber and timber connections. Laboratory tests on structural elements in concrete, timber and steel.
CVE 411: STRUCTURAL ANALYSIS I (3 UNITS)
Indeterminate structural analysis: Energy and Virtual work methods, Slope deflection and Moment distribution methods. Elastic Instability. Simple plastic theory of bending. Collapse loads. Introduction to influence line in the analysis of indeterminate structures.
CVE 413: HIGHWAY ENGINEERING I (2 UNITS)
Engineering aspects of highways. Route location and survey. Geometric design, pavement design, interchange design and spacing. Highway information systems, freeway, networks and safety. Design, construction and maintenance of culverts. Design of drainage appertenanies. Different cross-sections of roads. Construction equipment types. Carryout practical in the design studio and on site on various items.
CVE 415: WATER RESOURCES AND ENVIRONMENTAL ENGINEERING I (2 UNITS)
Sources of water and waste water. Physical, chemical and biological characteristics of water and wastewater. Water quality standards. Design periods, population studies. Water consumption, variation in demands, fire demand, coincidental draft, hydrant flow test and flow calculations. The Hydraulic of open channels and Wells Drainage. Hydrograph Analysis. Reservoir and Flood-routing. Hydrological forecasting, Hydraulic Structures, i.e Dams, Dykes/Levees, Weirs, Docks and Harbours, Spillway, Stilling basins, Man Holes and Coastal Hydraulic Structures, etc. Engineering Economy in Water resources Planning. Water resources evaluation
CVE 417: ENGINEERING SURVEYING AND PHOTOGRAMMETRY II (3 UNITS)
Theodolite traversing. Tacheometry surveys. Simple curve ranging. Topographical surveying. General principles of application of photography to surveying. Basic definitions in photogrammetry. Simple photogrammetric instruments. Basic mathematics of photogrammetry. Methods of acquisition of aerial photographs and its uses for heighting and mapping. Introduction to hydrographical surveying.
Practical: Route surveying by the use of theodolite and tapes for alignment and setting out. Contouring and topo-plan production. Simple photogrammetric exercises.
CVE 501: STUDENT PROJECT I (3 UNITS)
Literature review and bench work on final year project. A first report on detailed task to be carried out, their schedule work carried out up to date and the findings shall be submitted for evaluation.
CVE 502: STUDENT PROJECT II (3 UNITS)
Bench work on project, seminar and final year report presentation.
CVE 503: STRUCTURAL ANALYSIS II (2 UNITS)
Plastic Methods of Structural analysis. Matrix Methods of Structural analysis. Elastic Instability. Continuum of plane strain, elastic flat plates flat plates and torsion, solution by series, finite difference, finite element. Yield line Analysis and Strip methods for slabs.
CVE 504: HIGHWAY ENGINEERING II (2 UNITS)
Highway Planning and Traffic Surveys. Pavement Design. Construction and maintenance. Administration and Finance of Highways. Study of Nigerian highways design policies, standard and specifications. Comparison with international standards, administration and finance.
CVE 505: DESIGN OF STRUCTURES III (2 UNITS)
Plastic methods of structural analysis, matrix methods of structural analysis, elastic instability continuum of plain strain, elastic flat plates and torsion, solution by series, finite difference, finite element methods.
Composite Design and construction in steel and reinforced concrete.Design of Structural Foundations. Pre-stressed concrete design. Modern Structural form. Tall Buildings, Lift shafts and shear walls, system buildings. Design projects.
CVE 506: WATER RESOURCES & ENVIRONMENTAL ENGINEERING II (2 UNITS)
The Work of the Sanitary Engineer. Waste Water collection, treatment, Disposal and Design. Solid waste collection, treatment, disposal and design of systems. Physical, chemical and biological characteristics of water and wastewater. Sewage flow rate. Design principles of separate, combined and semi-separate sewage systems. Estimation of dry weather flows and storm water overflows, pumping systems and invited siphons. Maintenance of sewers. Characteristics and composition of industrial wastewater, sampling and methods of analysis of industrial wastewater, measures for treatment of industrial wastewater. Domestic, industrial and agricultural solid waste. Storage, collection, transport and disposal. Refuse processing and recovery. Introduction to Environmental Impact Assessment (EIA).
CVE 507: GEOTECHNICAL ENGINEERING (4 UNITS)
Stresses in Soils. Consolidation and settlement. Shear Strength of soils. Earth Pressures. Bearing Capacity of Soils. Foundations: Normal and Deep Foundations. Slope Stability. Site Investigations.
CVE 508: TRANSPORTATION ENGINEERING (2 UNITS)
Transportation systems and their planning. Design of the various transportation networks. Financial appraisal and funding of various transportation systems, roles of various tiers of government in a given transportation systems. Social and economic effects of a new or improved transportation system on the environment. Definition and components of transportation engineering. Type and component of fixed transportation facilities. Ride function of facilities. Effects of vehicle loads and water on performance of ride function of railways, runways and roads. Characteristics of highway materials and their improvement methods. Traffic characteristics and application in geometric design. Laboratory experiments on soil stabilization and testing of bituminous materials.
CVE 510: HYDRAULIC STRUCTURES (3 UNITS)
Reservior study with reference to types, selection of sites, storage capacity, operations siltation and silt removal. Discuss various types of dams, techniques for site location, classification and types selection. Seepage and causes of failure in dams. Design of various types of hydrautic structures : conveyance structures, pipe lines and pipe systems siphone, draft tubes, canals, sewers, Spillway, clutes, culverts, reservoir outlet, conduit). Energy Dissipating structures, surge tanks, stilling basins, drop structures, check dams. Flow measuring and control structures. Weirs, shuices, gates and valves turnout. Collecting and diffusion structures. Intake structures, infiltration galleries, drains,surface drainages, intakes perforated pipes. Water stabilization structures levees cutoff, dikes, breakwaters and sealwalls. Channel lining seepage from channels, design, construction and maintenance of linings (vegetative, impervious soils, masonry, convete and bituminous materials).
CVE 511: INDUSTRIAL ECONOMICS (2 UNITS)
Law of management economics, management models, revenue of the firms, production decision, cost of production, profit analysis of the firms, pricing techniques location and localization of industries, industrial growth in Nigeria, the size of the firm integration and diversification marketing; demand and forecasting. Distributive trade in Nigeria, business finance, investment, capital budgeting and management control. Government policies and firm. Financing Technology: Capital equipment investment appraisal methods. Break even analysis. Budgeting and financial control. Fundamentals of cost accounting with emphasis on production costing. Areas of conflicts between Engineering valuation. Management: Oraganzational structure and behavior, engineer to engineer manager transition, managerial functions, principles and techniques of planning, forecasting organizing technical activities, project selection and management, style of leadership and management techniques.
CVE 512: TRAFFIC AND HIGHWAY ENGINEERING (3 UNITS)
Highway planning and traffic surveys. Administration and finance of Highways. Coordination of all transportation media. Transportation planning and economics. Traffic management and design of traffic signals, control systems and safety devices.
Parking and parkways: Different types of road construction materials and construction methods. Carry out practical exercises on each of the topics treated above; perform laboratory tests on different types of road construction materials.
CVE 513: INDUSTRIAL LAW AND MANAGEMENT (2 UNITS)
Law, ethics and conduct in engineering. Legal definitions and specifications. Application of business law to engineering. Industrial relations: Law of contract and engineering. Industrial relations: Law of contract and unionism, terms and conditions of employment. Intellectual property: patents, trademarks, copyrights, license and royalty. Contracts and contract documents, Technology transfer law. Safety and environmental regulations: health and safety law, environmental guidelines and laws. Technological responsibilities and liabilities: best practice, after sales. Technology impact assessment: effects on worker and staff, users and public safety, product lifetime and end of life disposal, legal and moral responsibilities. Role of the Engineer as a witness. Engineering business; types, the structure and functions of organizations. Management of engineer to manager transition. R & D management. Project selection and management. Capital investment policies. Technological collaborations: sub-contraction, consultancies, joint ventures and linkage programmes. Management of change and innovation.
CVE 514: GEOTECHNICAL ENGINEERING II (3 UNITS)
Summary of common clay minerals. Clay mineralogy and clay water systems. Rate of consolidation. Accelerating consolidating with sand drains and surcharge. Shear strength of saturated clays. Stress paths. Shear strength of compacted unsaturated clays. Undrained vane shear test. Review of slope stability of circular ship surfaces. Slope stability of non circular ship surfaces. Foundation subjected to dynamic forces maintenance; Avoiding failures in construction materials and foundation.
Earth Dams; planning, design, construction, instrumentation, sub-surface exploration scope, site reconnaissance, boring, test pite, sampling, field test, soil report.
CVE 516: ADVANCED STRUCTURAL ANALYSIS (3 UNITS)
Analysis of Indeterminate structure using stiffers and flexibility matrix methods. Computer applications to practical structures. Continum of plane strain, elastic flat plates, solution by series, finite differencies, finite element methods. Beam on elastic foundation. Partial differential equation. Membrane theory. Analysis of thin-stretched membrane. Theory of thin shells: Classification, structural action, shells of revolution and shells of translation. Examples: Cylindrical shells. Application and limitations of membrane theory. Introduction to folded plate structures, different types and structural behavior. Structural dynamics. Introduction to cured members and non prismatic structures.
CVE 518: UNIT PROCESSES WATER AND WASTE WATER RESOURCES ENGINEERING (2 UNITS)
Theory and application of physical, chemical and biological operation and processes in water and waste water treatment. Topics include: Reactor engineering (completely mixed flow, plug flow and dispersed of mass transfer and oxygen transfer coefficients. Equalization, Floatation, iron and manganese removal, water softening, taste and odour removal.
Introduction to treatability studies: activated sludge process, biological filtration, stabilization ponds, anaerobic sludge digestion, thickening and disposal removal. Site visit to water and waste treatment plants.
CVE 519: ENVIRONMENTAL POLLUTION (3 UNITS)
Water pollution: Types of sources of water pollution, self – purificationof streams; Analysis of the dispersal of pollutants in streams and estuaries. The effects of pollutants on the chemical quality and the ecology of receiving streams. Europlication and control of water pollution. Stream and effluent standards.
Air pollution: Theory, principles and practices related to engineering control of particulate and gaseous emissions from natural, individual, agricultural, commercial and municipal sources of atmospheric pollution. The effects of atmospheric pollution on various forms of life including both direct and secondary effects, control devices of air pollution.
Noise Control: Sources of noise and control measures. Measurement and standard.
CVE 521: ADVANCED STRUCTURAL ANALYSIS (3 UNITS)
Analysis of indeterminate structures using direct stiffness and flexibility matrix methods. Computer applications to practical structures. Continuum of plane strain, elastic flat plate, solutions by series, finite differences, finite element methods. Beam on elastic foundation. Partial differential equations. Membrane theory. Analysis of thin-stretched membrane. Theory of thin shells: Classification, structural action, shell of revolution and shells of translation. Examples: Cylindrical shells. Application and limitations of membrane theory. Introduction to folded plate structures, different types and structural behavior. Structural Dynamics. Introduction to curved members and non prismatic structures.
CVE 523: CONSTRUCTION ENGINEERING (3 UNITS)
Earthwork and earth moving and construction equipment. Taking and basement construction. Vertical communication in buildings, staircases, elevators, ramps, escalators, systems building. Advance building structural systems, space frames, folded, plates, arches etc construction materials, Maintenance of Civil Engineering structures. Formwork design, component assembly, improvement of productivity and construction practices, safety, project financing, insurance and bonding, contract terms.
CVE525: IRRIGATION AND DRAINAGE ENGINEERING (3 UNITS)
Analysis and design of surface and combined drainage systems, collectors, storages and pumps. Methods of overflow protection of large areas. Analysis and design of irrigation systems. Soil-plant-water relationships. Water supplies, water delivery systems and water distribution systems.
FACULTY OF AGRICULTURE
Prof. KEHINDE Adetunji L.
Dean, Faculty of Agriculture
Email:
FACULTY OF BASIC AND APPLIED SCIENCES
Prof. O. Israel OYEWOLE, B.Sc, M.Sc, Ph.D
Acting Dean, Faculty of Basic and Applied Sciences
Email:
FACULTY OF BASIC AND MEDICAL SCIENCES
Dr. OYEYIPO Ibukun P. , B.Sc (Hons), M.Sc, Ph.D
Acting Dean, Faculty of Basic and Medical Sciences
Email:
FACULTY OF CLINICAL SCIENCES
Dr. Mrs. M.O. Isawumi
Dean, Faculty of Clinical Sciences
Email:
[ Read More... ]
FACULTY OF EDUCATION
Dr. E. A. OKANLAWON
Acting Dean, Faculty of Education
Email:
FACULTY OF ENGINEERING AND ENVIRONMENTAL SCIENCES
Dr. OLAWALE Simon O., B.Tech., M.Sc., Ph.D
Acting Dean, Faculty of Engineering and Environmental Sciences
Email:
FACULTY OF HUMANITIES
Dr. BALOGUN Temitope
Acting Dean, Humanities and Culture
Email:
Dr. Temitope Abiodun Balogun received her PhD from the University of Ibadan. She is an Associate Professor at Osun State University where she specialises in Functional Grammar,Pragmatics, Discourse Studies and Gender Studies. She was the acting Head of Department of the Languages and Linguistics between 2013/2014 and 2015/2016 sessions. She has attended conferences in many parts of the world like Leicester, United Kingdom, Minneapolis, USA and others. She has to her credit at the same time, many academic papers in both national and international outlets.
Prof. GBADAMOSI Olaide Abass
Acting Dean, Faculty of Law
Email:
Professor Olaide Abass Gbadamosi, a Professor of Migration Law is a member of Senate, Committee of Provosts, Deans and Directors, Board of Postgraduate Studies. Professor. O. A. Gbadamosi attended Igbinedion University, Okada, University of Benin and Nigerian Law School, Abuja respectively. [ Read More... ]
FACULTY OF MANAGEMENT SCIENCES
Dr. ILESANMI
Acting Dean, Faculty of Management Sciences
Email:
FACULTY OF RENEWABLE RESOURCES
Dr. IPINMOROTI Mabel
Acting Dean, Renewable Resources
Email:
[ Read More... ]
Dr. ASHIYANBOLA
Dean, Faculty of Social Sciences
Email:
STUDENT AFFAIRS
Dr. Oluseye O. ABIONA
Acting Dean, Student Affairs
Email:
|
Accounting |
|
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
| |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
| |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
| |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
| |
|
|
|
|
 |
|
|
|
|
 |
|
Chief Host:
Prof. Labode POPOOLA B.Sc., M.Sc., Ph.D
Email: ,
Professor Labode Popoola is a Professor of Forest Economics, born on 28 September, 1960.
He graduated with Bachelor of Science (Honours) in 1984 from the University of Ibadan. He had his Master of Science in Forest Economics and Management in 1987 and Doctor of Philosophy in Forest Economics in 1990, both at the prestigious University of Ibadan, Nigeria. [ Read More... ]
Host:
Prof. Victor ADETIMIRIN
Email: victor.adetimirin@uniosun.edu.ng
For Planning Committee:
Dr. John AGBONIFO
Email: john.agbonifo@uniosun.edu.ng
Prof. Obijiofor Aginam
Deputy Director & Head,
United Nations University International, Institute for Global Health,
Kuala Lumpur, Malaysia.
Prof. Janice Olawoye,
Former Dean,
Faculty of Agriculture and Forestry,
University of Ibadan, Ibadan.
Prof. Tunde Babawale
Former Director CBAAC,
Department of Political Science,
University of Lagos, Lagos.
Prof. Ahmed Yerima
College of Humanities,
Redeemer’s University,
Ede.
Prof. Isaac Albert
Institute for Peace and Strategic Studies,
University of Ibadan, Ibadan.
Ms. Ida Mae Fernandez,
Regional Programme Coordinator,
Free Movement of Persons and Migration in West Africa Project,
IOM, Abuja.
Prof. Janice Olawoye,
Former Dean,
Faculty of Agriculture and Forestry,
University of Ibadan, Ibadan.
Prof. Janice Olawoye,
Former Dean,
Faculty of Agriculture and Forestry,
University of Ibadan, Ibadan.
Prof. Janice Olawoye,
Former Dean,
Faculty of Agriculture and Forestry,
University of Ibadan, Ibadan.
 |
 |
 |
|
Prof. Olufemi Bamiro, Former Vice-Chancellor, University of Ibadan, Ibadan. |
Prof. Abiodun Alao, African Leadership Centre, School of Global affairs, Kings College, London. |
Ogbeni Rauf Aregbesola, Former Governor, |
| 10. Yoruba and The World | ||
 |
||
| Prof. Duro Adeleke Department of Linguistics and African Languages, University of Ibadan, Ibadan. |
|
Discussants:
|
||
|
|
|
|
|
Dr. Mustapha Hamid, Minister of Inner Cities and Zongo Development, and Former Minister for Information, |
Prof. Olanrewaju Fagbohun, Vice-Chancellor, |
Oba Adedokun Abolarin, His Royal Highness,
|
 |
 |
 |
|
Prof. Dele Layiwola, Institute of African Studies, |
Dr. Tunji Olaopa, Ibadan School of Governance and Public Policy, Ibadan. |
Prof. Adetunji Kehinde, Department of Agricultural Economics and Extension, |
 |
 |
|
|
Prof. Lanre Olaniyan, Director, CESDEV, |
Dr. Bolanle Wahab,
Urban and Regional Planning Department, |
Prof. Anthony Kola-Olusanya, Department of Science, Technology and Mathematics Education, |
| |
|
 |
|
Prof. Ayodeji Oluleye, Department of Production and Industrial Engineering, University of Ibadan, Ibadan. |
Dr. Nathaniel D. Danjibo, Institute for Peace and Strategic Studies, University of Ibadan, Ibadan. |
Prof. Temi Ologunorisa, Department of Meterology and Climate Science, Federal University of Technology, Akure. |
|
Remote Speakers:
|
||
|
|
|
|
|
1. Prof. Jefferey D. Sachs |
2. Dr. Guido Schmidt-Traub |
3. Prof. Ikenna Onyido, FRSC, FAAS, FAS |
|
Director, Centre for Sustainable Development |
Executive Director |
Director, Centre for Sustainable Development |
 |
 |
 |
|
4. Prof. Patrick Paul Walsh |
5. Dr. Belay Begashaw |
6. Eve de la Mothe Karoubi |
|
Univeristy College Dublin, |
Director General, |
Senior Manager, |
 |
 |
|
|
7. Prof. Toyin Falola |
8. Prof. Albert Ayeni |
|
|
Jacob and Frances Sanger Chair in the Humanities |
Ethnic Crop Research Specialist; |
|
|
Remote Speakers:
|
||
| Chief Host | Host | For Planning Committee |
|
|
|
|
|
Prof. Labode Popoola Vice Chancellor, |
Prof. Victor O. Adetimirin |
Dr. John Agbonifo |
oye Oyinlola Auditorium, Osun State University, Osogbo, Nigeria.
Registration Fee: Attendance is FREE but intending participants are required to register at https://bit.ly/30eZHpv
Keynote Address: Prof. Obijiofor Aginam
Deputy Director & Head,
United Nations University International
Institute for Global Health,
Kuala Lumpur, Malaysia.
Topics and Lead Paper Presenters
1. Sustainable Development Education and Practice – Prof. Janice Olawoye, Former Dean, Faculty of Agriculture and Forestry, University of Ibadan
2. Leveraging Indigenous Knowledge and African Heritage for Sustainable Development – Prof. Tunde Babawale, FormerDirector CBAAC, Department of Political Science, University of Lagos, Lagos.
3. Managing the Leadership-Followership Nexus for Sustainable Development in Africa – Prof. Ahmed Yerima, College of Humanities, Redeemer’s University, Ede.
4. Conflicts: Their Ramifications and Impacts on Sustainable Development – Prof. Isaac Albert, Institute for Peace and Strategic Studies, University of Ibadan, Ibadan.
5. Building Climate-Resilient Development Agenda: Issues and Context – Prof. Francis Adesina, Department of Geography, Obafemi Awolowo University, Ile-Ife.
6. Migration: The Good, the Bad and the Ugly, and How they Impact Sustainable Development – Ms. Ida Mae Fernandez, Regional Programme Coordinator, Free Movement of Persons and Migration in West Africa Project, IOM, Abuja.
7. Leveraging on Technology for Africa’s Sustainable Development – Prof. Olufemi Bamiro, Former Vice-Chancellor, University of Ibadan, Ibadan.
8. Issues in Natural Resources and Sustainable Development – Prof. Abiodun Alao, African Leadership Centre, School of Global affairs, Kings College, London.
9. Sustainable Development in an Emerging State: The State of Osun – Ogbeni Rauf Aregbesola, Former Governor, State of Osun.
10. Yoruba and The World – Prof. Duro Adeleke, Department of Linguistics and African Languages, University of Ibadan, Ibadan.
Discussants
1. Prof. Mustapha Hamid,
Minister of Inner Cities and Zongo Development, and Former Minister for Information,
Accra, Ghana.
2. Prof. Olanrewaju Fagbohun,
Vice-Chancellor,
Lagos State University, Lagos.
3. His Royal Highness,
Orangun of Oke-Ila,
Oba Adedokun Abolarin.
4. Prof. Dele Layiwola,
Institute of African Studies,
University of Ibadan, Ibadan.
5. Dr. Tunji Olaopa,
Ibadan School of Governance and Public Policy,
Ibadan.
6. Prof. Adetunji Kehinde,
Department of Agricultural Economics and Extension,
Osun State University, Osogbo.
7. Prof. Lanre Olaniyan,
Director, CESDEV,
University of Ibadan, Ibadan.
8. Dr. Bolanle Wahab,
Urban and Regional Planning Department,
University of Ibadan, Ibadan.
9. Prof. Anthony Kola-Olusanya,
Department of Science, Technology and Mathematics Education,
Osun State University, Osogbo.
10. Prof. Ayodeji Oluleye,
Department of Production and Industrial Engineering,
University of Ibadan, Ibadan.
11. Dr. Nathaniel D. Danjibo,
Institute for Peace and Strategic Studies,
University of Ibadan, Ibadan.
12. Prof. Temi Ologunorisa,
Department of Meterology and Climate Science,
Federal University of Technology, Akure.
REMOTE SPEAKERS
1. Prof. Jefferey D. Sachs
Director, Centre for Sustainable Development
Columbia University, New York;
Director, Sustainable Development Solutions Network;
Special Adviser to the UN Secretary General on the SDGs
2. Dr. Guido Schmidt-Traub
Executive Director
Sustainable Development Solutions Network,
Paris, France.
3. Prof. Ikenna Onyido, FRSC, FAAS, FAS
Director, Centre for Sustainable Development
Nnamidi Azikiwe University,
Awka, Anambra State, Nigeria.
4. Prof. Patrick Paul Walsh,
Univeristy College Dublin,
Chairman, Global Consortium for the Master’s in Development Practice Programme.
5. Dr. Belay Begashaw,
Director General,
The Sustainable Development Goals Centre for Africa,
Kigali, Rwanda.
6. Eve de la Mothe Karoubi,
Senior Manager,
Sustainable Development Solutions Network,
Paris, France.
7. Prof. Toyin Falola,
Jacob and Frances Sanger Chair in the Humanities
University of Texas at Austin, USA.
8. Prof. Albert Ayeni,
Ethnic Crop Research Specialist;
Leader, Rutgers’ Entrepreneurship Ag Program (REAP),
Rutgers, The State University of New Jersey, USA.
Prof. Labode Popoola
Vice Chancellor,
Osun State University, Osogbo.
(Chief Host)
Prof. Victor O. Adetimirin
Acting Director, GASDI
(Host)
Email:
Tel: +2348036513929
Dr. John Agbonifo
For Planning Committee
Email:
Tel: +2348054827660
GLOBAL AFFAIRS AND SUSTAINABLE DEVELOPMENT INSTITUTE (GASDI) OF OSUN STATE UNIVERSITY
The Global Affairs and Sustainable Development Institute (GASDI) was established by the Senate of Osun State University in October, 2018 with a mandate to address issues of Sustainable Development in unique and effective ways that can fast-track the attainment of the Sustainable Development Goals. The aim of the Institute is to become a center of excellence in postgraduate teaching and research in all areas of sustainable development. To this end, GASDI will offer Master and Ph.D. degree programmes in:
(i) Sustainable Development Practice,
(ii) Indigenous Knowledge and Heritage Studies,
(iii) Leadership and Governance,
(iv) Peace and Conflict Studies,
(v) Climate and Society, and
(vi) Migration Studies
Situated at the core of Yoruba culture and tradition, the Institute is also poised to pursue research and carry out other initiatives on Yoruba and the world. We will also run short duration certificate courses in these fields/programmes as well as conduct workshops to improve the efficiency of governmental and non-governmental organizations.
More...
Engr. Rauf Aregbesola had his primary and secondary education in Ondo State, and later attended the Polytechnic, Ibadan, where he studied Mechanical Engineering and graduated in 1980.
An associate member of the American Institute of Industrial Engineers (AIIE), member of the Nigerian Institute of Management (NIM) and a Fellow of Nigerian Society of Engineers (NSE), Nigerian Association of Technological Engineers (NATE) and Certified Marketing Communications Institute of Nigeria (CMCIN), Rauf Aregbesola has a wealth of experience garnered through dint of hard work in both the public and private sectors such as the Nigerian External Telecommunications now renamed Nigerian Telecommunications Ltd. and Lagos Airport Hotel before establishing his own Engineering Services Company, Aurora Nigeria Limited, in 1986. The company had since its establishment handled numerous major projects for both government and private organizations in most States of the federation.
Politically, he has been no less active and forthright. His involvement dates back to his undergraduate days when he was speaker of the Students’ Parliament (1977/78) at the Polytechnic, Ibadan and the President of the Black Nationalist Movement (1978-1980). He was also an active supporter of other progressive students’ movement nationwide, which earned him, for instance, the life membership of National Association of Technological Students. In June 1990, he became an elected delegate to the SDP Inaugural Local Government Area Congress. In July of the same year, he was also a delegate to its first National Convention in Abuja.
Engr. Aregbesola as a pro-democracy and human rights activist was a major participant in the demilitarization and pro-democracy struggles of the 1990s. He is equally active in community associations, especially in Alimosho, his base, where he remains the Secretary to the LGA Elders’ Forum to date. Prior to his appointment as the Lagos State Commissioner for Works and Infrastructure (1999 till date) he was Director of the Bola Ahmed Tinubu Campaign Organization (BATCO), which engineered the electoral victory of Asiwaju Bola Ahmed Tinubu as the Governor of Lagos State in 1999. He performed similar feat using the platform of Independent Campaign Group (ICG) to ensure the re-election of Asiwaju for a second term in office.
Since his appointment and re-appointment, Engineer Aregbesola has continued to confound all with the strength of his commitment to selfless service. His diligence, sincerity and tirelessness in the administration of the vast Ministry of Works and Infrastructure as well as supervision of the Public Works Corporation and State Electricity Board has been acknowledged as being responsible for the outstanding success that has been recorded by the present Lagos State administration especially in road rehabilitation/maintenance and street lighting.
To date, Engr. Aregbesola has successfully rehabilitated about 841 roads, through the Public Works Corporation’s Operation Tax Payers Money in Action and over 600 roads through the Ministry of Works and Infrastructure’s Operation Patch it Well. These two agencies working round the year through road maintenance gangs work by day and night.
In addition the Ministry has awarded about 445 (As at 1st April 2005) roads projects to facilitate socio-economic activities in the State.
Other noble and people-centered programmes of the Ministry include the all year round drainage clearing gang (Drain Ducks), which has cleared over 1250 KM of drains all around Lagos and the establishment of round the year streetlight maintenance programme.
Within this same period, the Ministry under his able leadership has also renovated 665 staff quarters and furnished over 300. An exercise that no government has embarked on over the last 20 years.
The Ministry has been able to supplement the National Electric Power Authority’s power supply with an additional 270 Megawatts through the Independent Power Project. This was the hallmark of the first term of Asiwaju Bola Ahmed Tinubu’s Administration in Lagos State. Discussions are still ongoing to bring in more private investors into power sector.
Several other novel achievements and innovations due to his visionary qualities and enterprise include the redefinition and application of new aesthetic standards to ministry blocks and offices as corporate workplaces; vision and mission definition, annual staff retreats & modern manpower capacity building trainings; introduction of facility management practices; pioneering achievements in PR (ministry journal) and IT (website) operation; Pioneering Private/Public Sector Partnership Ventures; Award-winning best practices projects; etc.
The strings of awards that have trailed the life of the Honourable Commissioner are eloquent testimonies of all that has been said about him. Earlier in his working life, Engr. Rauf Aregbesola was decorated with the War Against Indiscipline (WAI) Badge of Excellence at the Kujama Satellite Earth Station of the Nigerian Telecommunications Ltd.
 |
OSUN STATE UNIVERSITY, P.M.B 4494, OSOGBO NIGERIA |
REVISED ACADEMIC CALENDAR FOR 2018/2019 SESSION
2018/2019 ACADEMIC SESSION
November, 2018
Monday, 19th November Committee of Provosts, Deans and Directors
Tuesday, 20th NovemberBusiness Committee of Senate
Wednesday, 21st NovemberBoard of Postgraduate Studies
Thursday, 22nd NovemberSenate
Monday, 26th NovemberManagement Meeting/Resumption
December, 2018
Monday, 3rd – Sunday, December, 2018Resumption of Students/Opening of E-Portal for Registration for all students for Harmattan Semester 2018/2019 Session
Monday, 10th Decembercommencement of lectures in all Departments
Monday, 10th December College Board of Agriculture, Education, Health Sciences and Law.
Tuesday, 11th December College Board (SET,Management and Social Sciences, Humanities and Culture)
Wednesday, 12th December Management Meeting
Thursday, 13th DecemberAcademic Planning Sub- Committee
Friday, 14th DecemberUniversity Research Committee
Monday, 17th December –Friday 28th DecemberLate Registration with Penalty
Monday, 17th DecemberManagement Meeting
Tuesday, 18th December Board of Postgraduate Studies
Wednesday, 19th DecemberLibrary Committee/ Security Committee
Wednesday, 19th DecemberBoard of Postgraduate Studies
Thursday, 20th DecemberSenate
Friday, 21st DecemberStaff- Students Colloquium
Friday, 21st Decembere-Registration ends for all Students
Friday, 21st DecemberNew Year Break
January, 2019
Monday 7th JanuaryResumption from New Year Break
Monday, 7th JanuaryManagement Meeting
Monday, 7th January, Resumption after New Year Break and Continuation of Lectures
Wednesday, 9th January Committee of Provosts, Deans and Directors
Thursday, 10th January Development Committee
Friday, 11th JanuaryUniversity Research Committee
Monday, 14th JanuarySecurity Committee
Tuesday, 15th January Business Committee of Senate
Tuesday, 15th January Board of Postgraduate Studies
Thursday, 17th JanuarySenate
Tuesday, 29th January - Friday, 1st FebruaryOrientation for Fresh Students
February, 2019
Monday, 11th FebruaryManagement Meeting
Wednesday, 13th FebruaryMatriculation of Fresh Students
Tuesday, 19th February Board of Postgraduate Studies
Thursday, 28th FebruarySenate
March 2019
Friday, 15 MarchEnd of Lectures (Harmattan Semester)
Monday, 18th March – Friday, 22nd MarchLecture Free Week
Wednesday, 20th MarchSecurity Committee
Monday, 25th March – Friday, 12th AprilHarmattan Semester Examination
Monday, 6th - Friday, 10th MarchGNS Examinations
Thursday, 18th MarchFaculty of Management Sciences Lecture
Monday, 20th MarchManagement Meeting
Thursday, 23rd March Security Committee
Friday, 24th MarchEnd of Harmattan Semester
Thursday, 30th March Senate
April, 2019
Tuesday, 16thAprilBoard of Postgraduate Studies
Monday, 15thApril– Friday, 26th AprilHarmattan Semester Break
Monday, 15thMarch - Friday, 3rd MayMarking of Examination Scripts
May, 2019
Monday, 6th May– Friday, 10th MayConsideration of Results at Departmental, Faculty and College Levels
Monday, 29th AprilResumption for Rain Semester / Commencement of Lectures for Rain Semester 2016/2017 Session
Monday, 29th April – Friday, 10th Maye-Registration for all Students for Rain Semester 2016/2017 Session
Tuesday, 30th AprilFinance Sub-Committee
May, 2019
Thursday, 2nd MayCommittee of Provosts, Deans and Directors
Thursday, 9th May College of Humanities & Culture Annual Lecture
Monday, 13th May Management Meeting
Tuesday, 14th May Business Committee of Senate
Wednesday, 15thMay Staff-Students Colloquium
Wednesday, 15th May College Board (Agriculture, Education,
Health Sciences and Law)
Thursday, 16th MayBoard of Postgraduate Studies
Friday, 17th May Appointments and Promotions Committee (Academic)
Friday, 17th May College Board (Sciences, Engineering and Technology, Management and Social Sciences, Humanities and Culture)
Friday, 17th MayUniversity Research Committee
Monday, 20th MaySecurity Committee
Monday, 18th May – Friday, 24th MayLate Registration with Penalty
Wednesday, 15th MayCollege of Agriculture Annual Lecture Friday, 24th MayLate Registration with Penalty ends
Thursday, 30th MaySenate
June, 2019
Monday, 3rd JuneCeremonials Committee
Tuesday, 4th June Business Committee of Senate
Tuesday, 11th JuneFaculty of Engineering Annual Lecture
Wednesday, 12th June College Board (Agriculture, Education, Health Sciences and Law)
Thursday, 13th June Board of Postgraduate Studies
Friday, 14th June Appointments and Promotions Committee
(Admin and Technical)
Friday, 14th June College Board (Sciences, Engineering and Technology, Management and Social Sciences, Humanities and Culture)
Friday, 14th June University Research Committee
Monday, 17th June Management Meeting
Wednesday, 19th June Security Committee
Thursday, 27th June Senate
Friday, 28th June College of SET Annual Lecture
July, 2019
Wednesday, 3rd JulyFaculty Lecture, Basic and Applied Sciences
Tuesday, 9th JulyBoard of Postgraduate Studies
Wednesday, 10th JulyCollege of Management and Social Sciences Lecture
Monday, 15th JulyManagement Meeting
Wednesday, 18th July Security Committee
Thursday, 25th July Senate
August, 2019
Friday, 9th AugustEnd of Lectures for Rain Semester
Monday, 12th August - Friday, 16th August-Lecture Free Week
Tuesday, 13th AugustFaculty Board (Agriculture, Education and Law)
Wednesday, 14th August Faculty Board (Sciences, Management and Social Sciences)
Thursday, 15th August Faculty Board (Health Sciences, Engineering and Technology, Humanities and Culture)
Wednesday, 14th AugustLibrary Committee
Thursday, 15th AugustBoard of Postgraduate Studies
Friday, 16th AugustCeremonials Committee
Monday, 19th AugustAcademic Planning Sub-Committee
Monday, 19th August – Friday, 6th SeptemberRain Semester Examination
Monday, 9th August – Friday, 23rd AugustGNS Examination
Wednesday, 28th AugustUniversity Research Committee
Thursday, 16th August Committee of Provosts, Deans and Directors
Monday, 26th AugustManagement Meeting
Tuesday, 20th August Development Committee
Tuesday, 20th August Finance Sub-Committee
Wednesday, 21st August Business Committee of Senate
Thursday, 21st August Senate
September, 2019
Tuesday, 3rd September College of Health Sciences Lecture
Wednesday, 4th SeptemberSecurity Committee
Thursday, 5th SeptemberFaculty of Basic Medical Sciences Annual Lecture
Friday, 6th SeptemberFaculty of Clinical Sciences Annual Lecture
Monday, 9th- Friday, 27th SeptemberMarking of Examination Scripts
Monday, 9th SeptemberRain Semester Break
Tuesday, 10th SeptemberCollege Board (Agriculture, Education and Law)
Wednesday, 11th September College Board (Sciences, Management and Social Sciences)
Thursday, 12th SeptemberCommittee of Provosts, Deans and Directors
Friday, 13th September College Board (Health Sciences, Engineering and Technology, Humanities and Culture)
Monday, 16th September Management Meeting
Tuesday, 17th September College Board (Agriculture, Education and Law)
Wednesday, 18th September College Board (Sciences, Management and Social Sciences)
Thursday, 19th September Committee of Provosts, Deans and Directors
Friday, 20th September College Board (Health Sciences, SET, Humanities and Culture)
Monday, 23rd September Security Committee
Monday, 30th September–Consideration of Results at Departmental,Friday, 4th October Faculty and College Levels
Monday, 23rd September Staff-Students Colloquium
Tuesday, 24th SeptemberLibrary Committee
Tuesday, 24th September Board of Postgraduate Studies
Wednesday, 25th September Business Committee of Senate
Wednesday, 25th September University Research Committee
Thursday, 26th September Senate
Friday, 27th September Development Committee
October 2019
Friday, 4th OctoberEnd of Rain Semester
Friday, 4th OctoberFinance Sub-Committee
Monday, 7th OctoberManagement Meeting
Monday, 7th OctoberEnd of 2018/2019 Session /Commencement of Annual Leave for Academic Staff
CALENDAR FOR 2019/2020 ACADEMIC SESSION
November, 2019
Monday, 18th November Opening of e-Portal for registration and Payment of fees for all students
The Management wishes to confirm the regime of fees payable during 2018/2019 academic session by all students. For ease of reference, the tables of fees as applicable to all students are detailed hereunder as categories (a), (b) and (c).
a. Freshers (2018/2019 Session) 100L and the new Direct Entry/Transfer students are to pay the new fee regime as stated below;
| Non Science | Science/ Anatomy/ Physiology |
Nursing/ |
All Engineering Courses | Accounting, Political Science, Business Administration, Economics, Industrial Relations & Personnel Management | |
| Tuition | 130,000.00 | 155,000.00 | 195,000.00 | 155,000.00 | 155,000.00 |
| Faculty/ Departmental Due |
2,500.00 | 2,500.00 | 2,500.00 | 2,500.00 | 2,500.00 |
| ICT | 5,000.00 | 5,000.00 | 5,000.00 | 5,000.00 | 5,000.00 |
| Library | 5,000.00 | 5,000.00 | 5,000.00 | 5,000.00 | 5,000.00 |
| TISHIP | 5,000.00 | 5,000.00 | 5,000.00 | 5,000.00 | 5,000.00 |
| Games | 5,000.00 | 5,000.00 | 5,000.00 | 5,000.00 | 5,000.00 |
| Examination | 10,000.00 | 10,000.00 | 10,000.00 | 10,000.00 | 10,000.00 |
| Laboratory/ Bench Fee |
- | 10,000.00 | 10,000.00 | 15,000.00 | - |
| Sub Total | 162,500.00 | 197,500.00 | 237,500.00 | 202,500.00 | 187,500.00 |
| Acceptance | 40,000.00 | 40,000.00 | 40,000.00 | 40,000.00 | 40,000.00 |
| Medical Test | 15,000.00 | 15,000.00 | 15,000.00 | 15,000.00 | 15,000.00 |
| Caution | 10,000.00 | 10,000.00 | 10,000.00 | 10,000.00 | 10,000.00 |
| Student Hand Book | 500 | 500 | 500 | 500 | 500 |
| TOTAL | 228,000.00 | 263,000.00 | 303,000.00 | 268,000.00 | 253,000.00 |
b. Returning undergraduate students (200L and 300L - 2017/2018 Direct Entry) who were admitted in the 2017/2018 session under the new fee regime that came into operation in 2017/2018 session.
| Non Science | Science/ Anatomy/ Physiology |
Nursing/ |
All Engineering Courses | Accounting, Political Science, Business Administration, Economics, Industrial Relations & Personnel Management | |
| Tuition | 130,000.00 | 155,000.00 | 195,000.00 | 155,000.00 | 155,000.00 |
| Faculty/ Departmental Due |
2,500.00 | 2,500.00 | 2,500.00 | 2,500.00 | 2,500.00 |
| ICT | 5,000.00 | 5,000.00 | 5,000.00 | 5,000.00 | 5,000.00 |
| Library | 5,000.00 | 5,000.00 | 5,000.00 | 5,000.00 | 5,000.00 |
| TISHIP | 5,000.00 | 5,000.00 | 5,000.00 | 5,000.00 | 5,000.00 |
| Games | 5,000.00 | 5,000.00 | 5,000.00 | 5,000.00 | 5,000.00 |
| Examination | 10,000.00 | 10,000.00 | 10,000.00 | 10,000.00 | 10,000.00 |
| Laboratory/ Bench Fee |
- | 10,000.00 | 10,000.00 | 15,000.00 | - |
| TOTAL | 162,500.00 | 197,500.00 | 237,500.00 | 202,500.00 | 187,500.00 |
c. Returning undergraduate students (300L and above) who were admitted in 2016/2017 session and earlier under the old fee regime.
| Non Science | Science/ Agric/ Engineering/ Public Health |
Nursing/ |
|
| Tuition | 75,000.00 | 75,000.00 | 100,000.00 |
| Faculty/ Departmental Due |
2,500.00 | 2,500.00 | 2,500.00 |
| ICT | 5,000.00 | 5,000.00 | 5,000.00 |
| Library | 5,000.00 | 5,000.00 | 5,000.00 |
| TISHIP | 5,000.00 | 5,000.00 | 5,000.00 |
| Games | 5,000.00 | 5,000.00 | 5,000.00 |
| Examination | 5,000.00 | 5,000.00 | 5,000.00 |
| Laboratory/ Bench Fee |
- | 5,000.00 | 5,000.00 |
| TOTAL | 102,500.00 | 107,500.00 | 132,500.00 |
FRESH STUDENTS ARE ALSO TO NOTE THE FOLLOWING:
i. Departments that might have peculiarities such as Laboratory manual, teaching practice manual, other training kits etc, would be charged separately, subject to approval by the University Management.
ii. Add and delete of courses after registration would cost N1,000.00
iii. 5% increase would be added to late registration at the closure of normal registration and 1% increase would be added every two weeks.
iv. All fresh Students must obtain CLEARANCE from their respective College Secretaries before they can be activated to make payments of tuition and other allied fees.
TERMS OF PAYMENT AND REGISTRATION FOR 2018/2019 SESSION
i. The payment of school fees henceforth is by Interswitch WebPay Platform through the use of Interswitch enable Debit/ATM cards. For more information, read or download below, the Step-By-Step Guide on How to Use the UNIOSUN WebPAY Platform. You can also read the WebPAY Frequently Asked Questions and Tips here for further information.
ii. Other payments such as Portal Access and Late Registration shall also be by the use of Interswitch WebPAY Platform.
iii. All students in the College of Law, Ifetedo Campus are required to pay their ‘Accommodation Fees’ of N60,000.00 (Sixty Thousand Naira Only) using the following account details:
Title of Account: UNIOSUN Integrated Ventures Limited
Account No: 0122778142
Bank: WEMA Bank
Note: Upon payment, students are to present the payment evidence at the College Office, Ifetedo Campus for further registration.
Any student that requires additional information or explanation should feel free to contact his/her College Accounts Officer.
The above is for your information, please.
G.A.A. Shittu
Registrar
